Monel 400 Hydraulic Control Line Tube

Nkọwa dị mkpirikpi:

Weld Control Lines bụ ọkacha mmasị ewu maka akara ahịrị eji na downhole mmanụ na gas ngwa.A na-eji ahịrị njikwa welded anyị na SCSSV, Injection kemịkalụ, mmecha ọma dị elu na ngwa nlele.Anyị na-enye ahịrị njikwa dị iche iche.(TIG Welded, na plọg na-ese n'elu mmiri sere, yana ahịrị nwere nkwalite) Usoro dị iche iche na-enye anyị ikike ịhazi ihe ngwọta iji zute mmecha gị nke ọma.

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Ntinye ngwaahịa

Meilong Tube na-arụpụta nke ọma enweghị nkebi na redrawn, welded na redrawn tubing nke sitere na corrosion-eguzogide austenitic, duplex, super duplex igwe anaghị agba nchara na akara nickel alloy.A na-eji tubing ahụ dị ka ahịrị njikwa hydraulic na ahịrị injection kemịkalụ na-enye mmanụ na gas pụrụ iche, ụlọ ọrụ geothermal.

Ihe dị mkpa

Igwe eriri tub nke ọ bụla bụ ogologo na-aga n'ihu na-enweghị welds orbital.

A na-anwale eriri igwe tub nke ọ bụla site na nrụgide ezubere iche.

Ndị nyocha ndị ọzọ (SGS, BV, DNV) nwere ike ịgba akaebe na saịtị ahụ.

Nnwale ndị ọzọ bụ ule eddy ugbu a, kemịkalụ, na-adaba adaba, na-enwu ọkụ, tensile, mkpụrụ, elongation, ike maka ịdị mma ihe.

Ngosipụta ngwaahịa

Monel 400 Hydraulic Control Line Tube (2)

Monel 400 Hydraulic Control Line Tube (3)

Ndidi n'akụkụ

ASTM B730 / ASME SB730, Monel 400, UNS N04400
ASTM B751 / ASME SB751
Nha OD	Ntachi obi OD	Ntachi obi WT
1/8'	± 0.004'' (± 0.10 mm)	± 12.5%
5/8'≤OD≤1'' (15.88≤OD≤25.4 mm)	± 0.0075'' (± 0.19 mm)	± 12.5%

Meilong Standard
Nha OD	Ntachi obi OD	Ntachi obi WT
1/8'	± 0.004'' (± 0.10 mm)	± 10%
5/8'≤OD≤1'' (15.88≤OD≤25.4 mm)	± 0.004'' (± 0.10 mm)	± 8%

ASTM B165 / ASME SB165, Monel 400, UNS N04400
Nha OD	Ntachi obi OD	Ntachi obi WT
1/8'' ≤OD <3/16'' (3.18≤OD <4.76 mm)	+0.003'' (+0.08 mm) / -0	± 10%
3/16''≤OD <1/2'' (15.88≤OD <12.7 mm)	+0.004'' (+0.10 mm) / -0	± 10%
1/2 ''≤OD≤1'' (12.7≤OD≤25.4 mm)	+0.005'' (+0.13 mm) / -0	± 10%

Meilong Standard
Nha OD	Ntachi obi OD	Ntachi obi WT
1/8'' ≤OD <3/16'' (3.18≤OD <4.76 mm)	+0.003'' (+0.08 mm) / -0	± 10%
3/16''≤OD <1/2'' (15.88≤OD <12.7 mm)	+0.004'' (+0.10 mm) / -0	± 10%
1/2 ''≤OD≤1'' (12.7≤OD≤25.4 mm)	+0.004'' (+0.10 mm) / -0	± 8%